Narrow By Category:
Coal Tar Epoxy Coating
Elastomeric Coatings
High Performance Coatings
Specialty Coatings
Thermal Insulating Ceramic
Sort By:
CeRam-Kote 2000
CeRam-Kote 2000 is a thin-film, spray-applied and air-dried ceramic novalac epoxy coating system engineered to provide excellent chemical immersion service protection to all metals, fiberglass reinforced plastics, concrete and plastic substrata.

CeRam-Kote 54
CeRam-Kote 54® is a thin-film, spray applied and air-dried ceramic coating engineered to provide excellent abrasion and corrosion protection in critical service environments for all metals, fiberglass reinforced plastics, concrete and plastic subst

CeRam-Kote Marine
CeRam-Kote Marine is a thin-film, spray applied and air-cured ceramic epoxy coating system recommended for atmospheric corrosion/light abrasion resistance as well as non-chemical immersion service in a marine environment.

CeRam-Kote SPG22
CeRam-Kote SPG22 is a technically advanced ceramic, 100% novolac epoxy material that has been designed to be a high-build corrosion barrier. CeRam-Kote SPG22 may be applied in thickness of 30 mils (750 microns). CeRam-Kote SPG22 is supplied as a 100%

CeRam-Thane 100
CeRam-Thane® 100 is a single component thin-film, waterborne urethane engineered to be used as either a DTM (direct to metal) primer or as a topcoat to provide ultraviolet light resistance and color fastness.

CeRam-Thane 300
CeRam-Thane 300 is a two-component catalyzed polyester polyurethane engineered to provide color and gloss retention, abrasion and impact resistance, and flexibility along with a high degree of resistance to most environments.

ChemThane CT-370 is a two component, acrylic aliphatic isocynate polyurethane coating with excellent gloss and color rentention. It has a tile-like finish which is very tough but yet a flexible film. Ideal for use in Industrial, Commercial, and Marin

ChemThane CT-373 is a two component, acrylic aliphatic isocyanate polyurethane coating with excellent gloss retention. It has a tie-like finish which is very tough, but yet flexible film. CT- 373 is used as a clear coat to extend the performance of t

Denso Protal 7200
Protal 7200 is a VOC free, 100% solids, 2 part epoxy coating specially formulated to compliment FBE coated pipe. It is a high build liquid coating that is brush or spray applied n one coat in the field or shop. It cures very fast to allow quick handl

Galvosil 15680
HEMPEL’S GALVOSIL 15680 is a two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

Hempadur 17630/ Hempadur 17633
Hempadur 17630/ Hempadur 1763 is a two-component, high-build, polyamide adduct-cured epoxy paint which cures to a hard and tough coating with good resistance to abrasion, seawater and crude oils.

Hempadur 85671
Hempadur 85671 is a two component, amine adduct cured phenolic epoxy coating with very good adhesion and high temperature, water and chemical resistance.

Hempadur Mastic 45880/45881
HEMPADUR MASTIC 45880/45881 is a two-component polyamide adduct cured, high solids, high build epoxy paint.

Hempadur Multi-Strength 35530
HEMPADUR MULTI-STRENGTH 35530 is a solvent-free, two-component, high-build, polyamine cured epoxy paint, which cures to a coating with good resistance to fresh water, sea water, crude oil, and to abrasion.

Hempadur Multi-Strength GF 35870
HEMPADUR MULTI-STRENGTH GF 35870 is an amine-adduct cured epoxy coating - the product is reinforced with Glassflakes.

Hempadur Quattro 17634
HEMPADUR QUATTRO 17634 is a two-component universal epoxy paint, which cures to a hard and tough coating with good resistance to abrasion, seawater and various oils.

Hempadur Zinc 17360
HEMPADUR ZINC 17360 is a two-component, zinc rich epoxy primer. It cures to a hard wearing and highly weather-resistant coating.

Hempathane HS 55610
HEMPATHANE HS 55610 is a two-component polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

MasterProtect 100 CR
MasterProtect 100 CR is a 100% solids, spray able, high build chemical-resistant epoxy coating.

MCU- 100 is a one component, Moisture Cured Polyurethane Aluminum Coating. It is also a barrier primer or tie coat to prevent lifting of strong solvent top coats over conventional coatings, and most chemical coatings.

Poly-Chem PC-650 is a two component heavy duty non-skid epoxy coating. It helps to provide slip resistance in wet and slippery conditions. Ideal for both new and old concrete surface, interior and exterior surfaces.

Silicone Aluminium 56913
HEMPEL'S SILICONE ALUMINIUM 56913 is a heat resistant aluminium pigmented polysiloxane paint.

Universal Primer UP-183 is a one component, rust inhibitive, corrosion resistant univeral primer. It is used as a tie coat over sound, aged conventional paints to upgrade to a more chemical resistant type coating.

Tell a Friend    Printer Friendly Page


© Copyright 2018, B & H Distributors. All rights reserved.

Site designed by Bizzuka Baton Rouge Web Design